A custom mirror should be planned from the wall, intended use and final dimensions. Vanity mirrors, full-wall mirrors and multi-panel gym or studio installations can create very different layout and mounting requirements.
NY-GoodHome handles custom-mirror project requests in Brooklyn and New York City. Call (223) 226-1828 with wall photos, rough measurements and any outlets, lights or fixtures near the mirror area.
Mirror Applications
Vanity mirrors can be one panel or multiple pieces around lighting and fixtures. Larger wall mirrors may use several panels where access, wall size or layout makes one piece impractical.
Gym and studio applications also need attention to panel seams, base conditions and wall flatness.
Size, Shape and Edges
Identify the desired shape and whether exposed edges should be polished, beveled or finished another way. Confirm the available specification for the actual piece before fabrication.
If the mirror needs unusual holes or cutouts, those should be measured precisely before fabrication.
A single mirror gives an uninterrupted reflection, while several panels introduce deliberate seams and may be more practical to move through the building. For a long wall, choose whether seams should align with cabinets, architectural divisions or the center of the room. Include switches and light fixtures in that layout rather than fitting them around a finished order.
A polished exposed edge and a decorative bevel produce different borders. Consider how the mirror will meet a backsplash, adjoining wall or frame, and which edges can be seen or touched. Show rounded corners, curves or asymmetrical shapes on a drawing; describing a piece as “approximately oval” is not enough to define its final outline.
How Should Cutouts Be Planned?
Mark each outlet, wall light and other interruption from a consistent reference edge. Distinguish a complete opening inside the mirror from a notch at its perimeter. Fixtures that are due to move should reach their final position before those locations are confirmed. Electrical relocation or removal of a hardwired fixture is a separate task to coordinate.
Wall and Mounting Conditions
The wall should be stable and appropriate for the selected mounting method. Large mirrors should not be treated as ordinary picture hanging without considering weight and surface.
Describe the wall material and finish, any moisture damage and whether an existing mirror or adhesive must be removed. The proposed mounting approach must suit both the mirror and its backing surface. A newly repaired wall may need further finishing before final placement; agree on those steps before scheduling the mirror work.
For a bathroom project, plan the mirror with the lighting, vanity and any nearby shower glass without assuming they share a mounting method. The custom glass and mirrors guide can help when the project combines reflective and transparent pieces.
Custom vs Standard Vanity Mirror
If the product is already a finished customer-supplied mirror and the main task is mounting it with a vanity installation, use Bathroom Vanity & Mirror Installation.
If the project needs a non-mirrored panel instead, use Glass Cut to Size and describe its application and supports.
Plan the Mirror Around Fixtures and Access
Photograph the whole wall, including lights, outlets, counters, trim and any hardware that may interrupt the mirror. Mark the desired outside dimensions and show whether the mirror is one piece or several panels. For a vanity, identify the relationship to the counter and lighting. For a gym or studio wall, show the full run and the intended seam positions rather than measuring each section in isolation.
A large mirror also has to reach the room. Include narrow doors, stair turns and elevator limits before selecting panel sizes. The wall finish and mounting arrangement should be reviewed before final measurements are used for fabrication. An uneven or damaged wall should not be treated as a problem the mirror will automatically conceal.
Do I need a new mirror or just installation?
If you already have the finished mirror, provide its dimensions, weight if known and photos of its mounting provisions. If the mirror must be made to fit, include the shape, exposed edges and fixture openings. Those are different requests even when they go on the same wall.